The Institute of Physics (IOP) journal, Bioinspiration and BIomimetics, has published an open access article on camouflage inspired by zebrafish and squid. From the IOP’s May 2, 2012 news release

Researchers from the University of Bristol have created artificial muscles that can be transformed at the flick of a switch to mimic the remarkable camouflaging abilities of organisms such as squid and zebrafish.

They demonstrate two individual transforming mechanisms that they believe could be used in ‘smart clothing’ to trigger camouflaging tricks similar to those seen in nature.

…

The soft, stretchy, artificial muscles are based on specialist cells called chromatophores that are found in amphibians, fish, reptiles and cephalopods, and contain pigments of colours that are responsible for the animals’ remarkable colour-changing effects.

Here’s the video mentioned in the IOP’s May 2, 2012 news release,

The lead author Jonathan Rossiter provides a description of the work (which may help you better understand what you’re seeing on the video), from the May 2, 2012 news item,

Two types of artificial chromatophores were created in the study: the first based on a mechanism adopted by a squid and the second based on a rather different mechanism adopted by zebrafish.

A typical colour-changing cell in a squid has a central sac containing granules of pigment. The sac is surrounded by a series of muscles and when the cell is ready to change colour, the brain sends a signal to the muscles and they contract. The contracting muscles make the central sacs expand, generating the optical effect which makes the squid look like it is changing colour.

The fast expansion of these muscles was mimicked using dielectric elastomers (DEs) – smart materials, usually made of a polymer, which are connected to an electric circuit and expand when a voltage is applied. They return to their original shape when they are short circuited.

In contrast, the cells in the zebrafish contain a small reservoir of black pigmented fluid that, when activated, travels to the skin surface and spreads out, much like the spilling of black ink. The natural dark spots on the surface of the zebrafish therefore appear to get bigger and the desired optical effect is achieved. The changes are usually driven by hormones.

The zebrafish cells were mimicked using two glass microscope slides sandwiching a silicone layer. Two pumps, made from flexible DEs, were positioned on both sides of the slide and were connected to the central system with silicone tubes; one pumping opaque white spirit, the other a mixture of black ink and water.

“Our artificial chromatophores are both scalable and adaptable and can be made into an artificial compliant skin which can stretch and deform, yet still operate effectively. This means they can be used in many environments where conventional ‘hard’ technologies would be dangerous, for example at the physical interface with humans, such as smart clothing,” continued Rossiter.

I wonder what these smart clothes/smart skin would feel like against your personal skin given that we are talking about ‘artificial muscles’. For example, how much movement would your clothing/smart skin have independent of you?

By independent, I mean that everything occurs externally. While we’re not ordinarily conscious of all our physical responses they are stimulated internally and part of a whole body response (even though we may notice only localized responses, e.g., a rash). In the research, there’s an external stimulus and an external response via smart clothes/smart skin.

This is just speculation as I imagine we’re several years away from any field testing of these smart clothes/smart skin, assuming that scientists are able to address all the technical hurdles between a laboratory breakthrough and developing applications.

Thanks to Nanowerk where I first came across this information (May 2, 2012 news item).

They raise my hopes then dash them to the ground; still, this is very exciting news for anyone wanting self-cleaning windows. The April 26, 2012 news item on Nanowerk features some of the latest work from MIT (Massachusetts Institute of Technology) on nanotextures and ‘multifunctional’ glass,

One of the most instantly recognizable features of glass is the way it reflects light. But a new way of creating surface textures on glass, developed by researchers at MIT, virtually eliminates reflections, producing glass that is almost unrecognizable because of its absence of glare — and whose surface causes water droplets to bounce right off, like tiny rubber balls.

The new “multifunctional” glass, based on surface nanotextures that produce an array of conical features, is self-cleaning and resists fogging and glare, the researchers say. Ultimately, they hope it can be made using an inexpensive manufacturing process that could be applied to optical devices, the screens of smartphones and televisions, solar panels, car windshields and even windows in buildings.

Here’s what they mean by ‘conical features’,

Through a process involving thin layers of material deposited on a surface and then selectively etched away, the MIT team produced a surface covered with tiny cones, each five times taller than their width. This pattern prevents reflections, while at the same time repelling water from the surface. Image: Hyungryul Choi and Kyoo-Chul Park

David Chandler in his April 26, 2012 news release for MIT explains,

The surface pattern — consisting of an array of nanoscale cones that are five times as tall as their base width of 200 nanometers — is based on a new fabrication approach the MIT team developed using coating and etching techniques adapted from the semiconductor industry. Fabrication begins by coating a glass surface with several thin layers, including a photoresist layer, which is then illuminated with a grid pattern and etched away; successive etchings produce the conical shapes. The team has already applied for a patent on the process.

Since it is the shape of the nanotextured surface — rather than any particular method of achieving that shape — that provides the unique characteristics, Park and Choi [MIT mechanical engineering graduate students Kyoo-Chul Park and Hyungryul Choi] say that in the future glass or transparent polymer films might be manufactured with such surface features simply by passing them through a pair of textured rollers while still partially molten; such a process would add minimally to the cost of manufacture.

If you’re guessing that nature inspired some of this, read on (from Chandler’s MIT news release),

The researchers say they drew their inspiration from nature, where textured surfaces ranging from lotus leaves to desert-beetle carapaces and moth eyes have developed in ways that often fulfill multiple purposes at once. Although the arrays of pointed nanocones on the surface appear fragile when viewed microscopically, the researchers say their calculations show they should be resistant to a wide range of forces, ranging from impact by raindrops in a strong downpour or wind-driven pollen and grit to direct poking with a finger. Further testing will be needed to demonstrate how well the nanotextured surfaces hold up over time in practical applications.

The chief excitement seems to centre around applications with solar panels (from Chandler’s MIT news release),

Photovoltaic panels, Park explains, can lose as much as 40 percent of their efficiency within six months as dust and dirt accumulate on their surfaces. But a solar panel protected by the new self-cleaning glass, he says, would have much less of a problem. In addition, the panel would be more efficient because more light would be transmitted through its surface, instead of being reflected away — especially when the sun’s rays are inclined at a sharp angle to the panel. At such times, such as early mornings and late afternoons, conventional glass might reflect away more than 50 percent of the light, whereas an anti-reflection surface would reduce the reflection to a negligible level.

While some earlier work has treated solar panels with hydrophobic coatings, the new multifunctional surfaces created by the MIT team are even more effective at repelling water, keeping the panels clean longer, the researchers say. In addition, existing hydrophobic coatings do not prevent reflective losses, giving the new system yet another advantage.

More testing is needed and while they do fantasize about wider applications (car windows, microscopes, cameras, smartphones, building windows, etc. mentioned earlier in this posting)  for this technology there are no immediate plans to fulfill my dream of self-cleaning apartment windows and mirrors.

They raise my hopes then dash them to the ground; still, this is very exciting news for anyone wanting self-cleaning windows. The April 26, 2012 news item on Nanowerk features some of the latest work from MIT (Massachusetts Institute of Technology) on nanotextures and ‘multifunctional’ glass,

One of the most instantly recognizable features of glass is the way it reflects light. But a new way of creating surface textures on glass, developed by researchers at MIT, virtually eliminates reflections, producing glass that is almost unrecognizable because of its absence of glare — and whose surface causes water droplets to bounce right off, like tiny rubber balls.

The new “multifunctional” glass, based on surface nanotextures that produce an array of conical features, is self-cleaning and resists fogging and glare, the researchers say. Ultimately, they hope it can be made using an inexpensive manufacturing process that could be applied to optical devices, the screens of smartphones and televisions, solar panels, car windshields and even windows in buildings.

Here’s what they mean by ‘conical features’,

Through a process involving thin layers of material deposited on a surface and then selectively etched away, the MIT team produced a surface covered with tiny cones, each five times taller than their width. This pattern prevents reflections, while at the same time repelling water from the surface. Image: Hyungryul Choi and Kyoo-Chul Park

David Chandler in his April 26, 2012 news release for MIT explains,

The surface pattern — consisting of an array of nanoscale cones that are five times as tall as their base width of 200 nanometers — is based on a new fabrication approach the MIT team developed using coating and etching techniques adapted from the semiconductor industry. Fabrication begins by coating a glass surface with several thin layers, including a photoresist layer, which is then illuminated with a grid pattern and etched away; successive etchings produce the conical shapes. The team has already applied for a patent on the process.

Since it is the shape of the nanotextured surface — rather than any particular method of achieving that shape — that provides the unique characteristics, Park and Choi [MIT mechanical engineering graduate students Kyoo-Chul Park and Hyungryul Choi] say that in the future glass or transparent polymer films might be manufactured with such surface features simply by passing them through a pair of textured rollers while still partially molten; such a process would add minimally to the cost of manufacture.

If you’re guessing that nature inspired some of this, read on (from Chandler’s MIT news release),

The researchers say they drew their inspiration from nature, where textured surfaces ranging from lotus leaves to desert-beetle carapaces and moth eyes have developed in ways that often fulfill multiple purposes at once. Although the arrays of pointed nanocones on the surface appear fragile when viewed microscopically, the researchers say their calculations show they should be resistant to a wide range of forces, ranging from impact by raindrops in a strong downpour or wind-driven pollen and grit to direct poking with a finger. Further testing will be needed to demonstrate how well the nanotextured surfaces hold up over time in practical applications.

The chief excitement seems to centre around applications with solar panels (from Chandler’s MIT news release),

Photovoltaic panels, Park explains, can lose as much as 40 percent of their efficiency within six months as dust and dirt accumulate on their surfaces. But a solar panel protected by the new self-cleaning glass, he says, would have much less of a problem. In addition, the panel would be more efficient because more light would be transmitted through its surface, instead of being reflected away — especially when the sun’s rays are inclined at a sharp angle to the panel. At such times, such as early mornings and late afternoons, conventional glass might reflect away more than 50 percent of the light, whereas an anti-reflection surface would reduce the reflection to a negligible level.

While some earlier work has treated solar panels with hydrophobic coatings, the new multifunctional surfaces created by the MIT team are even more effective at repelling water, keeping the panels clean longer, the researchers say. In addition, existing hydrophobic coatings do not prevent reflective losses, giving the new system yet another advantage.

More testing is needed and while they do fantasize about wider applications (car windows, microscopes, cameras, smartphones, building windows, etc. mentioned earlier in this posting)  for this technology there are no immediate plans to fulfill my dream of self-cleaning apartment windows and mirrors.

Dr. Michelle Oyen, team leader and lecturer in the engineering department [Cambridge University, UK], added: “Research is a funny thing because you might think that we order everything up from scientific catalogues – but actually a lot of the things we use around the lab are household items, things that we picked up at the local home goods store – so our Lego robots just fit in with that mind-set.”

That was from the March 28, 2012 news item (Growing bones with Lego) on physorg.com. Oyen’s group at Cambridge University uses the robots to grow synthetic bones as they discuss in this video (from the Cambridge University webpage hosting the March 27, 2012 news release about Lego robots in the lab [it was part of a Google Science Fair promotion],

Here’s a bit more about the robots and about the team’s bone project (from the Cambridge University news release),

 “To make the bone-like substance you take a sample, then you dip it into one beaker of calcium and protein, then rinse it in some water and dip in into another beaker of phosphate and protein – you have to do it over and over and over again to build up the compound, [as seen in the video]” says Daniel Strange, one of the PhD students working on the research.

…

After a bit of investigation the researchers decided to build cranes from a Lego Mindstorms robotics kit, which contains microprocessors, motors, and sensors that can be programmed to perform basic tasks on repeat. The sample is tied to string at the end of the crane which then dips it in the different solutions.

The team quickly discovered that the miniature machines made from the famous plastic blocks vastly reduced the human time cost of creating the bone samples: “the great thing about the robots is once you tell them what to do they can do it very precisely over and over again – so a day later I can come back and see a fully made sample,” says Strange.

…

Bone defects can result from trauma, infection and the removal of tumours, and beyond a certain size of trauma bone is unable to regenerate itself. Current treatments include bone grafts, which can be risky and greatly increase recovery time.

The team at Cambridge are working on hydroxyapatite–gelatin composites to create synthetic bone, and the work is generating considerable interest due to the low energy costs and improved similarity to the tissues they are intended to replace.

Oyen and Strange have published a paper (behind a paywall), Biomimetic bone-like composites fabricated through an automated alternate soaking process, about their biomimetic work and attempts to create scaffolding (synthetic bone) in the journal Acta Biomaterialia. Here’s the abstract,

Hydroxyapatite–gelatin composites have been proposed as suitable scaffolds for bone and dentin tissue regeneration. There is considerable interest in producing these scaffolds using biomimetic methods due to their low energy costs and potential to create composites similar to the tissues they are intended to replace. Here an existing process used to coat a surface with hydroxyapatite under near physiological conditions, the alternate soaking process, is modified and automated using an inexpensive “off the shelf” robotics kit. The process is initially used to precipitate calcium phosphate coatings. Then, in contrast to previous utilizations of the alternate soaking process, gelatin was added directly to the solutions in order to co-precipitate hydroxyapatite–gelatin composites. Samples were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and nanoindentation. Calcium phosphate coatings formed by the alternate soaking process exhibited different calcium to phosphate ratios, with correspondingly distinct structural morphologies. The coatings demonstrated an interconnected structure with measurable mechanical properties, even though they were 95% porous. In contrast, hydroxyapatite–gelatin composite coatings over 2 mm thick could be formed with little visible porosity. The hydroxyapatite–gelatin composites demonstrate a composition and mechanical properties similar to those of cortical bone.

Z-Man or do I mean SpiderMan? They used to make reference to SpiderMan and/or geckos when there was some research breakthrough or other concerning adhesion (specifically, bioadhesion) but these days, it’s all geckos, all the time.

I’m going to start with the first announcement from the research team at the University of Massachusetts at Amherst, from the Feb. 17, 2012 news item on Nanowerk,

For years, biologists have been amazed by the power of gecko feet, which let these 5-ounce lizards produce an adhesive force roughly equivalent to carrying nine pounds up a wall without slipping. Now, a team of polymer scientists and a biologist at the University of Massachusetts Amherst have discovered exactly how the gecko does it, leading them to invent “Geckskin,” a device that can hold 700 pounds on a smooth wall. Doctoral candidate Michael Bartlett in Alfred Crosby’s polymer science and engineering lab at UMass Amherst is the lead author of their article describing the discovery in the current online issue of Advanced Materials (“Looking Beyond Fibrillar Features to Scale Gecko-Like Adhesion”). The group includes biologist Duncan Irschick, a functional morphologist who has studied the gecko’s climbing and clinging abilities for over 20 years. Geckos are equally at home on vertical, slanted, even backward-tilting surfaces.

Here’s a picture illustrating the material’s strength,

A card-sized pad of Geckskin can firmly attach very heavy objects such as this 42-inch television weighing about 40 lbs. (18 kg) to a smooth vertical surface. The key innovation by Bartlett and colleagues was to create a soft pad woven into a stiff fabric that includes a synthetic tendon. Together these features allow the stiff yet flexible pad to “drape” over a surface to maximize contact. Photo courtesy of UMass Amherst

This image is meant as an illustration of what the product could do and not as a demonstration, i.e., the tv is not being held up by ‘geckskin’.

There are other research teams around the world working on ways to imitate the properties of gecko feet or bioadhesion (my Nov. 2, 2011 posting mentions some work on robots with ‘gecko feet’ at Simon Fraser University [Canada] and my March 19, 2012 posting mentions in passing some work being done at the University of Waterloo [Canada] are two recent examples).

The University of Massachusetts team’s innovation (from the Feb. 17, 2012 news item),

The key innovation by Bartlett and colleagues was to create an integrated adhesive with a soft pad woven into a stiff fabric, which allows the pad to “drape” over a surface to maximize contact. Further, as in natural gecko feet, the skin is woven into a synthetic “tendon,” yielding a design that plays a key role in maintaining stiffness and rotational freedom, the researchers explain.

Importantly, the Geckskin’s adhesive pad uses simple everyday materials such as polydimethylsiloxane (PDMS), which holds promise for developing an inexpensive, strong and durable dry adhesive.

The UMass Amherst researchers are continuing to improve their Geckskin design by drawing on lessons from the evolution of gecko feet, which show remarkable variation in anatomy. “Our design for Geckskin shows the true integrative power of evolution for inspiring synthetic design that can ultimately aid humans in many ways,” says Irschick.

The research at the University of Massachusetts is being funded, in part, by DARPA (US Defense Advanced Research Projects Agency) through its Z-man program. From the March 2, 2012 news item on Nanowerk,

“Geckskin” is one output of the Z-Man program. It is a synthetically-fabricated reversible adhesive inspired by the gecko’s ability to climb surfaces of various materials and roughness, including smooth surfaces like glass. Performers on Z-Man designed adhesive pads to mimic the gecko foot over multiple length scales, from the macroscopic foot tendons to the microscopic setae and spatulae, to maximize reversible van der Waals interactions with the surface.

Here’s the reasoning for the Z-Man program, from the March 2, 2012 news item,

The Defense Advanced Research Projects Agency (DARPA)’s “Z-Man program” aims to develop biologically inspired climbing aids to enable soldiers to scale vertical walls constructed from typical building materials, while carrying a full combat load, and without the use of ropes or ladders.

Soldiers operate in all manner of environments, including tight urban terrain. Their safety and effectiveness demand maximum flexibility for maneuvering and responding to circumstances. To overcome obstacles and secure entrance and egress routes, soldiers frequently rely on ropes, ladders and related climbing tools. Such climbing tools cost valuable time to use, have limited application and add to the load warfighters are forced to carry during missions.

The Z-Man program provides more information, as well as, images here, where you will find this image, which is not as pretty as the one with the tv screen but this one is a demonstration,

A proof-of-concept demonstration of a 16-square-inch sheet of Geckskin adhering to a vertical glass wall while supporting a static load of up to 660 pounds. (from the Z-Man Program website)

In the very latest news, the University of Massachusetts team has won international funding for its (and Cambridge University’s) work on bioadhesion. From the University of Massachusetts at Amherst March 28, 2012 [news release],

Duncan Irschick, Biology, and Al Crosby, Polymer Science and Engineering, with Walter Federle of Cambridge University, have been awarded a three-year, $900,000 grant from the Human Frontiers Science Program (HFSP) in Strasbourg, France, to study bioadhesion in geckos and insects.

Theirs was one of only 25 teams from among approximately 800 to apply worldwide. HFSP is a global organization that funds research at the frontiers of the life sciences.

Crosby, Irschick and colleagues received international scientific and media attention over the past several weeks for their discovery reported in the journal Advanced Materials, of how gecko feet and skin produce an adhesive force roughly equivalent to the 5-ounce animal carrying nine pounds up a wall without slipping. This led them to invent “Geckskin,” a device that can hold 700 pounds on a smooth wall. Irschick, a functional morphologist who has studied the gecko’s climbing and clinging abilities for over 20 years, says the lizards are equally at home on vertical, slanted and even backward-tilting surfaces.

Not having heard of the Human Science Frontier Program (HSFP) previously, I was moved to investigate further. From the About Us page,

The Human Frontier Science Program is a program of funding for frontier research in the life sciences. It is implemented by the International Human Frontier Science Program Organization (HFSPO) with its office in Strasbourg.

…

The members of the HFSPO, the so-called Management Supporting Parties (MSPs) are the contributing countries and the European Union, which contributes on behalf of the non-G7 EU members.

The current MSPs are Australia, Canada, France, Germany, India, Italy, Japan, Republic of Korea, Norway, New Zealand, Switzerland the United Kingdom, the United States of America and the European Union.

I wonder how much impact all the publicity had on the funding decision. In any event, it’s good to find out about a new funding program and I wish anyone who applies the best of luck!

Butterflies are proving to be quite generous as they inspire ideas for greater production of green fuels in addition to everything else they’ve inspired. From the March 26, 2012 news item on Nanowerk,

“We were searching the ‘art of blackness’ for the secret of how those black wings [from black butterflies] absorb so much sunlight and reflect so little,” Fan [Tongxiang Fan, Ph.D] explained.…

Fan’s team observed elongated rectangular scales arranged like overlapping shingles on the roof of a house. The butterflies they examined had slightly different scales, but both had ridges running the length of the scale with very small holes on either side that opened up onto an underlying layer.

The steep walls of the ridges help funnel light into the holes, Fan explained. The walls absorb longer wavelengths of light while allowing shorter wavelengths to reach a membrane below the scales. Using the images of the scales, the researchers created computer models to confirm this filtering effect. The nano-hole arrays change from wave guides for short wavelengths to barriers and absorbers for longer wavelengths, which act just like a high-pass filtering layer.

The group used actual butterfly-wing structures to collect sunlight, employing them as templates to synthesize solar-collecting materials. They chose the black wings of the Asian butterfly Papilio helenus Linnaeus, or Red Helen, and transformed them to titanium dioxide by a process known as dip-calcining. Titanium dioxide is used as a catalyst to split water molecules into hydrogen and oxygen. Fan’s group paired this butterfly-wing patterned titanium dioxide with platinum nanoparticles to increase its water-splitting power. The butterfly-wing compound catalyst produced hydrogen gas from water at more than twice the rate of the unstructured compound catalyst on its own.

This work was presented at the American Chemical Society’s 243rd annual meeting themed Chemistry of Life  in San Diego, California, March 25-29, 2012.

As I’ve noted previously, although that was specific to Morpho butterflies (my Feb. 14, 2012 posting), butterflies are being very generous with their intellectual property.

Australia’s national science agency, CSIRO (Commonwealth Scientific and Industrial Research Organization), issued a March 21, 2012 news release announcing a new book on biomimcry (or biomimetics), Nature’s Nanostructures edited by CSIRO scientists. From the news release,

A new book, which explores how nature’s own laboratory has been producing some of the world’s most advanced nanomaterials for millions of years, has been released.

Nature’s Nanostructures, edited by CSIRO scientists Dr Amanda Barnard and Dr Haibo Guo, focuses on the animals, minerals and extra-terrestrial bodies that have been producing nanomaterials for millennia.

In the first collection of its kind, each chapter charts the complex characteristics of different nanomaterials, including the iridescent scales on the exoskeletons of beetles, magnetic particles in the beaks of pigeons and gold particles found in ores.

The book brings together studies of entomology, geology, astronomy, physics, chemistry, molecular biology and health to build a complete picture of naturally occurring nanomaterials.

“I think is it generally assumed that nanomaterials are a relatively new phenomenon but some nanoparticles have been present in animals and minerals for millions of years and are a natural occurrence,” says Dr Barnard, leader of the Virtual Nanoscience Laboratory at CSIRO.

“This book uniquely charts the diversity of these naturally occurring materials. It is both humbling and comforting to realise that nature did it first and that nanomaterials are not as new as we think,” she adds.

Cameron Chai’s March 21, 2012 news item about the book on Azonano notes,

New CSIRO research on beetles and the reflective qualities of their shells is included in the book. The chapter titled ‘Photonic Crystals in Beetles’ explores 3D crystals produced by opal weevils and how these nanostructures not only create vivid structural colours, but also reflect light at virtually any angle.

The book also contains research, produced by scientists in the US and Germany, into the different levels of magneto-reception found in the beaks of homing pigeons and how the nanostructures in their beaks work as an efficient magnetic field amplifier.

The book is available for purchase through Amazon. I’ve linked to the Canadian Amazon site so the price is listed in Canadian dollars.

Amanda Barnard has been mentioned here previously in my March 10, 2010 posting and my June 16, 2010 posting.

Nanocellulose seems to be one of the major topics at the ACS’s (Americal Chemical Society) 243rd annual meeting themed Chemistry of Life  in San Diego, California, March 25-29, 2012. From the March 25, 2012 news item on Nanowerk,

… almost two dozen reports in the symposium titled, “Cellulose-Based Biomimetic and Biomedical Materials,” that focused on the use of specially processed cellulose in the design and engineering of materials modeled after biological systems. Cellulose consists of long chains of the sugar glucose linked together into a polymer, a natural plastic–like material. Cellulose gives wood its remarkable strength and is the main component of plant stems, leaves and roots. Traditionally, cellulose’s main commercial uses have been in producing paper and textiles –– cotton being a pure form of cellulose. But development of a highly processed form of cellulose, termed nanocellulose, has expanded those applications and sparked intense scientific research. Nanocellulose consists of the fibrils of nanoscale diameters so small that 50,000 would fit across the width of the period at the end of this sentence.

“We are in the middle of a Golden Age, in which a clearer understanding of the forms and functions of cellulose architectures in biological systems is promoting the evolution of advanced materials,” said Harry Brumer, Ph.D., of Michael Smith Laboratories, University of British Columbia, Vancouver. He was a co-organizer of the symposium with J. Vincent Edwards, Ph.D., a research chemist with the Agricultural Research Service, U.S. Department of Agriculture in New Orleans, Louisiana. “This session on cellulose-based biomimetic and biomedical materials is really very timely due to the sustained and growing interest in the use of cellulose, particularly nanoscale cellulose, in biomaterials.”

One of the presenters has a very charming way of describing the nanocellulose product his team is working on (from the news item),

Olli Ikkala, Ph.D., [Aalto University, Finland] described the new buoyant material, engineered to mimic the water strider’s long, thin feet and made from an “aerogel” composed of the tiny nano-fibrils from the cellulose in plants. Aerogels are so light that some of them are denoted as “solid smoke. [emphasis mine]” The nanocellulose aerogels also have remarkable mechanical properties and are flexible.

There were some 20 presentations in this symposium held under the auspices of the ACS annual meeting. Here’s a few of the presentations (some of these folks have been featured on this blog previously), from the news item,

Native cellulose nanofibers: From biomimetic nanocomposites to functionalized gel spun fibers and functional aerogels Olli Ikkala, Professor, PhD, Aalto University, P.O. Box 5100, Espoo, Finland, FIN-02015, Finland , 358-9-470 23154, olli.ikkala@aalto.fi Native cellulose nanofibers and whiskers attract interest even beyond the traditional cellulose community due to their mechanical properties, availability and sustainability. We describe biomimetic nanocomposites with aligned self-assemblies combining nanocellulose with nanoclays, polymers, block copolymer, or graphene, allowing exciting mechanical properties. Functional ductile and even flexible aerogels are presented, combining superhydrophobicity, superoleophobicity, oil-spill absorption, photocatalytics, optically switchable water absorption, sensing, and antimicrobial properties. Finally mechanically excellent fibers are gel-spun and functionalized for electric, magnetic, optical and drug-release properties.

Evaluation of skin tissue repair materials from bacterial cellulose Lina Fu, Miss, Huazhong University of Science & Technology, College of Life Science & Technology, 1037 Luoyu Road, Wuhan, Hubei, 430074, China , 86-18971560696, runa0325@gmail.com Bacterial cellulose (BC) has been reported as the materials in the tissue engineering fields, such as skin, bone, vascular and cartilage tissue engineering. Exploitation of the skin substitutes and modern wound dressing materials by using BC has attracted much attention. A skin tissue repair materials based on BC have been biosynthesized by Gluconacetobacter xylinus. The nano-composites of BC and chitosan form a cohesive gel structure, and the cell toxicity of the composite is excellent. Unlike other groups, which showed more inflammatory behavior, the inflammatory cells of the BC group were mainly polymorph-nuclear and showed few lymphocytes. The BC skin tissue repair material has an obviously curative effect in promoting the healing of epithelial tissue and reducing inflammation. With its superior mechanical properties, and the excellent biocompatibility, these skin tissue repair materials based on BC have great promise and potential for wound healing and very high clinical value.

….

New materials from nanocrystalline cellulose Mark MacLachlan [mentioned in my Nov. 18, 2010 posting], University of British Columbia, Department of Chemistry, 2036 Main Mall, Vancouver, BC, V6T 1Z1, Canada , 604-822-3070, mmaclach@chem.ubc.ca Nanocrystalline cellulose (NCC) is available from the acid-catalyzed degradation of cellulosic materials. NCC is composed of cylindrical crystallites with diameters of ca. 5-10 nm and large aspect ratios. This form of cellulose has intriguing properties, including its ability to form a chiral nematic structure. By using the chiral nematic organization of NCC as a template, we have been able to create highly porous silica films and carbon films with chiral nematic organization.1,2 These materials are iridescent and their structures mimic the shells of jewel beetles. In this paper, I will describe our recent efforts to use NCC to create new materials with interesting optical properties.

Factors influencing chiral nematic pitch and texture of cellulose nanocrystal films Derek G Gray, McGill University, Department of Chemistry, Pulp and Paper Building, 3420 University Street, Montreal, QC, H3A 2A7, Canada , 1-514-398-6182, derek.gray@mcgill.ca Appropriately stabilized cellulose nanocrystal (NCC) suspensions in water form chiral nematic liquid crystalline phases above some critical concentration. In the absence of added electrolye, the chiral nematic pitch of such suspensions is longer than that of visible light. Films prepared by evaporation from the suspensions also often display the characteristic fingerprint patterns characteristic of long-pitch chiral nematic phases, but the pitch values can be shifted into the visible range by adding small quantities of electrolyte to the evaporating suspension. The factors that control the final pitch have been the subject of some confusion. While still not well understood, it is clear that at high nanocrystal concentrations and in solid films, the pitch is not simply a reversible function of nanocrystal concentration. We examine some of the factors that control the pitch and liquid crystal texture during the drying of chiral nematic NCC films.

….

Bioprinting of 3D porous nanocellulose scaffolds for tissue engineering and organ regeneration Paul Gatenholm, Professor, [mentioned in my March 19, 2012 posting] Wallenberg Wood Science Center, Chalmers, Department of Chemical and Biological Engineering, Kemigarden 4, Goteborg, V. Gotaland, SE41296, Sweden , 46317723407, paul.gatenholm@chalmers.se Nanocellulose is a promising biocompatible hydrogel like nano-biomaterial with potential uses in tissue engineering and regenerative medicine. Biomaterial scaffolds for tissue engineering require precise control of porosity, pore size, and pore interconnectivity. Control of scaffold architecture is crucial to promote cell migration, cell attachment, cell proliferation and cell differentiation. 3D macroporous nanocellulose scaffolds, produced by unique biofabrication process using porogens incorporated in the cultivation step, have shown ability to attract smooth muscle cells, endothelial cells, chondrocytes of various origins, urethral cells and osteoprogenitor cells. We have developed bioprinter which is able to produce 3D porous nanocellulose scaffolds with large size and unique architecture. Surface modifications have been applied to enhance cell adhesion and cell differentiation. In this study we have focused on use of 3D porous Nanocellulose scaffolds for stem cell differentiation into osteogenic and chondral lineages.

After my recent experience at the Vancouver Aquarium (Jan.19.12 posting) where I was informed that jellyfish are now called sea jellies, I was not expecting to see the term jellyfish still in use. I gather the new name is not being used universally yet, which explains the title for a March 23, 2012 news item on Nanowerk, Robotic jellyfish built on nanotechnology,

Researchers at The University of Texas at Dallas and Virginia Tech have created an undersea vehicle inspired by the common jellyfish that runs on renewable energy and could be used in ocean rescue and surveillance missions.

In a study published this week in Smart Materials and Structures (“Hydrogen-fuel-powered bell segments of biomimetic jellyfish”), scientists created a robotic jellyfish, dubbed Robojelly, that feeds off hydrogen and oxygen gases found in water.

“We’ve created an underwater robot that doesn’t need batteries or electricity,” said Dr. Yonas Tadesse, assistant professor of mechanical engineering at UT Dallas and lead author of the study. “The only waste released as it travels is more water.”

Engineers and scientists have increasingly turned to nature for inspiration when creating new technologies. The simple yet powerful movement of the moon jellyfish made it an appealing animal to simulate.

The March 22, 2012 press release from the University of Texas at Dallas features images and a video in addition to its text. From the press release,

The Robojelly consists of two bell-like structures made of silicone that fold like an umbrella. Connecting the umbrella are muscles that contract to move.

Here’s a computer-aided image,

A computer-aided model of Robojelly shows the vehicle's two bell-like structures.

Here’s what the robojelly looks like,

The Robojelly, shown here out of water, has an outer structure made out of silicone.

This robojelly differs from the original model,which was battery-powered. Here’s a video of the original robojelly,

The new robojelly has artificial muscles(from the Mar. 22, 2012 University of Texas at Dallas press release),

In this study, researchers upgraded the original, battery-powered Robojelly to be self-powered. They did that through a combination of high-tech materials, including artificial muscles that contract when heated.

These muscles are made of a nickel-titanium alloy wrapped in carbon nanotubes, coated with platinum and housed in a pipe. As the mixture of hydrogen and oxygen encounters the platinum, heat and water vapor are created. That heat causes a contraction that moves the muscles of the device, pumping out the water and starting the cycle again.

“It could stay underwater and refuel itself while it is performing surveillance,” Tadesse said.

In addition to military surveillance, Tadesse said, the device could be used to detect pollutants in water.

This is a study that has been funded by the US Office of Naval Research. At the next stage, researchers want to make the robojelly’s legs work independently so it can travel in more than one direction.