Top Ten Emerging Technologies 2013 from the World Economic Forum

Every year I sit down with my colleagues on the World Economic Forum’s Global Agenda Council on Emerging Technologies (WEF GAC-ET for short!!!!) and have a spirited discussion about what the top ten emerging technologies in the world will be.

Here then, in no particular order, is our annual expert view (or as a slideshow at the Washington Post) on what to watch this year (for comparison you find last years list here).

 

OnLine Electric Vehicles (OLEV)

Already widely used to exchange digital information, wireless technology can now also deliver electric power to moving vehicles. In next-generation electric cars, pick-up coil sets under the vehicle floor receive power remotely via an electromagnetic field broadcast from cables installed under the road surface. The current also charges an onboard battery used to power the vehicle when it is out of range. As electricity is supplied externally, these vehicles require only a fifth the battery capacity of a standard electric car, and can achieve transmission efficiencies of over 80 percent. Online electric vehicles are currently undergoing road tests in Seoul, South Korea.

 

3-D printing and remote manufacturing

Three-dimensional printing allows the creation of solid structures from a digital computer file, potentially revolutionising the economics of manufacturing if objects can be printed remotely in the home or office rather than requiring time and energy for transportation. The process involves layers of material being deposited on top of each other in order to create free-standing structures from the bottom up. Blueprints from computer-aided design are sliced into cross-section for print templates, allowing virtually-created objects to be used as models for ‘hard copies’ made from plastics, metal alloys or other materials.

 

Self-healing materials

One of the defining characteristics of living organisms is the inherent ability to repair physical damage done to them. A growing trend in biomimicry is the creation of non-living structural materials that also have the capacity to heal themselves when cut, torn or cracked. Self-healing materials which can repair damage without external human intervention could give manufactured goods longer lifetimes and reduce the demand for raw materials, as well as improving the inherent safety of structural materials used in construction or to form the bodies of aircraft.

 

Energy-efficient water purification

Water scarcity is a worsening ecological problem in many parts of the world due to competing demands from agriculture, cities and other human uses. Where freshwater systems are over-used or exhausted, desalination from the sea offers near-unlimited water but at the expense of considerable use of energy – mostly from fossil fuels – to drive evaporation or reverse osmosis systems. Emerging technologies offer the potential for significantly higher energy efficiency in desalination or purification of wastewater, potentially reducing energy consumption by 50 percent or more. Techniques such as forward osmosis can additionally improve efficiency by utilising low-grade heat from thermal power production or renewable heat produced by solar-thermal geothermal installations.

 

Carbon dioxide (CO2) conversion and use

Long-promised technologies for the capture and underground sequestration of carbon dioxide have yet to be proven commercially viable, even at the scale of a single large power station. New technologies that convert the unwanted CO2 into saleable goods can potentially address both the economic and energetic shortcomings of conventional CCS strategies. One of the most promising approaches uses biologically-engineered photosynthetic bacteria to turn waste CO2 into liquid fuels or chemicals, in low-cost, modular solar converter systems. Whilst only operational today at the acre scale, individual systems are expected to reach hundreds of acres within as little as two years. Being 10 to 100 times as productive per unit of land area, these systems address one of the main environmental constraints on biofuels from agricultural or algal feedstock, and could supply lower carbon fuels for automobiles, aviation or other large-scale liquid fuel users.

 

Enhanced nutrition to drive health at the molecular level

Even in developed countries millions of people suffer from malnutrition due to nutrient deficiencies in their diets. Efforts to improve the situation by changing diets have met with limited success.  Now modern genomic techniques have been applied to determine at the gene sequence level the vast number of naturally-consumed proteins which are important in the human diet. The proteins identified may have advantages over standard protein supplements in that they can supply a greater percentage of essential amino acids, and have improved solubility, taste, texture and nutritional characteristics. The large-scale production of pure human dietary proteins based on the application of biotechnology to molecular nutrition can deliver health benefits such as in muscle development, managing diabetes or reducing obesity.

 

Remote sensing

The increasingly widespread use of sensors that allow often passive responses to external stimulae will continue to change the way we respond to the environment, particularly in the area of health. Examples include sensors that continually monitor bodily function – such as heart rate, blood oxygen and blood sugar levels – and if necessary trigger a medical response such as insulin provision. Advances rely on wireless communication between devices, low power sensing technologies and, sometimes, active energy harvesting.  Other examples include vehicle-to-vehicle sensing for improved safety on the road.

 

Precise drug delivery through nanoscale engineering

Pharmaceuticals which can be precisely delivered at the molecular level within or around the cell offer unprecedented opportunities for more effectively treatments while reducing unwanted side effects. Targeted nanoparticles that adhere to diseased tissue allow for the micro-scale delivery of potent therapeutic compounds while minimizing their impact on healthy tissue, and are now advancing in medical trials. After almost a decade of research, these new approaches are now finally showing signs of clinical utility, through increasing the local concentration and exposure time of the required drug and thereby increasing its effectiveness. As well as improving the effects of current drugs, these advances in nanomedicine promise to rescue other drugs, which would otherwise be rejected due to their dose-limiting toxicity.

 

Organic electronics and photovoltaics

Organic electronics – a type of printed electronics – is the use of organic materials such as polymers to create electronic circuits and devices. In contrast to traditional (silicon based) semiconductors that are fabricated with expensive photolithographic techniques, organic electronics can be printed using low-cost, scalable processes such as ink jet printing- making them extremely cheap compared with traditional electronics devices, both in terms of the cost per device and the capital equipment required to produce them. While organic electronics are currently unlikely to compete with silicon in terms of speed and density, they have the potential to provide a significant edge in terms of cost and versatility. The cost implications of printed mass-produced solar photovoltaic collectors for example could accelerate the transition to renewable energy.

 

Fourth-generation reactors and nuclear waste recycling

Current once-through nuclear power reactors only utilise 1% of the potential energy available in uranium, leaving the rest radioactively contaminated as nuclear ‘waste’. Whilst the technical challenge of geological disposal is manageable, the political challenge of nuclear waste seriously limits the appeal of this zero-carbon and highly scaleable energy technology. Spent-fuel recycling and breeding uranium-238 into new fissile material – known as ‘Nuclear 2.0’ – would extend already-mined uranium resources for centuries while dramatically reducing the volume and long-term toxicity of wastes, whose radioactivity will drop below the level of the original uranium ore on a timescale of centuries rather millennia. This makes geological disposal much less of a challenge (and arguably even unnecessary) and nuclear waste a minor environmental issue compared to hazardous wastes produced by other industries. Fourth-generation technologies, including liquid metal-cooled fast reactors, are now being deployed in several countries and are offered by established nuclear engineering companies.

 

Members of the World Economic Forum’s Global Agenda Council on Emerging Technologies

 

Noubar Afeyan: CEO Flagship Ventures; Senior Lecturer, MIT Sloan School of Management

 

Nayef Al-Rodhan: Senior Member, St Antony’s College, University of Oxford; Director, Geopolitics of Globalisation and Transnational Security Programme, Geneva Centre for Security Policy, Geneva

 

Angela Belcher: Professor of Materials Science and Engineering and Biological Engineering, MIT

 

Jeffrey Carbeck: 2009 Clean Energy Fellow, New England Clean Energy Council; founding Chief Technology Officer, MC10 Inc

 

Javier Garcia-Martinez: Professor of Chemistry and Director, Nanotechnology Molecular Laboratory, University of Alicante, Spain; Co-Founder, Rive Technology

 

Michael Grätzel: Professor, Laboratory of Photonics and Interfaces, Ecole Polytechnique Fédérale de Lausanne, Switzerland

 

Julia Greer: Assistant Professor of Materials Science and Mechanics, California Institute of Technology

 

Clare Grey: Professor of Chemistry, University of Cambridge and Stony Brook University

 

Tim Harper: CEO and President, Cientifica Ltd; Director, Centre for Emerging Technology Intelligence.

 

Hu Zhijian: Secretary-General of the CPC, Chinese Academy of Science and Technology for Development, Ministry of Science and Technology of the People’s Republic of China

 

Sir David King: Founding Director, Smith School of Enterprise and the Environment, University of Oxford; Senior Science Adviser, UBS; Director, Cambridge Kaspakas; Chancellor, University of Liverpool, UK

 

Mark Lynas: Writer on climate change and environment; Visiting Research Associate, School of Geography and the Environment, University of Oxford

 

Kiyoshi Matsuda: Chief Innovation Officer, Corporate Strategy Office, Mitsubishi Chemical Holdings Corporation

 

Andrew Maynard: NSF International Chair of Environmental Health Sciences, University of Michigan

 

James Wilsdon: Professor of Science and Democracy, Science Policy Research Unit, University of Sussex, UK

Leave a Reply